Now its time for the front of the left rear quarter. The process is exactly the same.
|
|
You can see that the inner rocker and lower wheelwell rust damage I had to repair. These
pieces had to be fabricated.
|
|
Each piece was fabricated from cardboard templates and hammered & dollied into shape. Here
everthing is temporarily clamped in place and adjusted for fit.
|
|
Once welded in place, imperfections are ground down. Then everthing is primed and undercoated. Only
the areas that were originally undercoated by the factory were undercoated.
|
|
Here's the completed quarter in primer. Just like new.
|
|
The right side was just as bad as the left.
|
|
Here it is several days later. I should have more pictures, but my web space is limited.
|